SKF Locating - Stablizing Ring - 140mm OD - 129mm ID - 12.5mm WD - FRB12.5/140

Features
 • A bearing in the locating position must be secured axially in the housing
 • If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required
 • Typically, two locating rings are required per housing
 • One ring should be placed on each side of the bearing
 • If only one locating ring is required, it should be installed on the same side as the lock nut

Specifications

 • Accessory type: Locating ring
 • Outside diameter: 140 mm
 • Inside diameter: 129 mm
 • Width: 12.5 mm

Minimum sell quantity:

Order Quantity Multiple: