austdac STROB23A Strobe - High Intensity - Type MFLA3 - 12V - Red

Features
 • The MFLA3 is completely encapsulated within the lens body providing improved ingress protection and impact resistance
 • The strobe is available in the five colours red, green, yellow, blue and white
 • This allows the user to select a colour best suited for the application
 • The unit may be mounted on any free surface such as a sheet metal enclosure, using two M3 mounting studs
 • A gasket is supplied with the MFLA3 to provide IP66 ingress protection for the host enclosure
 • The strobe is easy to mount as it only requires three small holes, two for mounting and one for the leads, in the host enclosure
 • The MFLA3 is available in two supply voltage ranges, 4.0 to 7.88 volts for the MFLA3-06-xx and 8.0 to 12.6 volts for the MFLA3-12-xx
 • Both variants of the MFLA3 have very low current consumption at 15mA for the MFLA3-06-xx and 12mA for the MFLA3-12-xx
 • High intensity LED technology
 • IP66

Applications
 • The strobe type MFLA3 is a small explosion protected Ex ia LED based self-flashing strobe designed for general alarm annunciation applications in hazardous areas such as underground coalmines
 • These applications include visual warning alarms, visual prestart alarms, out of range process alarms and enunciators

Specifications

 • Name Strobe
 • Type MFLA3-xx-xx
 • Operating voltage 4.0V - 7.88V MFLA3-06-xx, 8.0V - 12.6V MFLA3-12-xx
 • Current 15mA MFLA3-06-xx, 12mA MFLA3-12-xx
 • Flash rate ~ 1Hz
 • Luminous intensity MFLA3-xx-RD >12,000mcd Red, MFLA3-xx-YL >12,000mcd Yellow, MFLA3-xx-WH >20,000mcd White, MFLA3-xx-GN >18,000mcd Green, MFLA3-xx-BL >5,400mcd Blue
 • Termination Flying leads, Orange-Black MFLA3-06-xx, Red-Black MFLA3-12-xx
 • Lead length 400mm
 • Lead conductor CSA 0.75mm2 (24/0.2 strands)
 • Dimensions 42mm (H) x 78mm (L) x 38mm (W)
 • Mounting 2 off M3 studs supplied with plain nuts and internal star washers
 • Mounting centres 60mm
 • Maximum mounting panel thickness 5mm
 • Mounting ingress protection IP66
 • Operating temperature -10ºC to +50ºC
 • Mass 100g
 • Host enclosure minimum IP rating IP55
 • Certification:
 • The Strobe type MFLA3-xx-xx is IECEx certified for use in group I hazardous areas under certificate IECEx ITA 08.0013X Ex ia I
 • The Strobe type MFLA3-xx-xx is ANZEx certified for use in group I hazardous areas under certificate ANZEx ITACS 05.4006X Ex ia I

Minimum sell quantity:

Order Quantity Multiple: