Dixell R0090024 XR75CX-5N613 Digital Controller

Features
 • Model XR75CX (32 mm x 74 mm) is a microprocessor based controller
 • It has four (4) relay outputs to control compressor, fan, and defrost, which can be either electrical or reverse cycle (hot gas) and light (configurable)
 • It can also have up to four (4) NTC (EU or US type) probe inputs
 • The first probe is used for temperature control
 • The second probe is used to control the defrost termination temperature at the evaporator
 • One of the two (2) digital inputs can operate as a third temperature probe
 • The fourth probe is used to control the condenser temperature (for condenser alarm management) or to display a temperature value
 • Set the PbC parameter to CtC to support standard CPC temperature sensors (factory default)
 • The RS-485 serial output enables the unit to be connected to a network line that is MODBUS-RTU compatible, such as the monitoring units of XWEB family
 • The Hot Key receptacle allows the controller to be programmed by means of the Hot Key programming keyboard
 • The controller is fully configurable through special parameters that can be easily programmed through the keyboard. 2.2. Ordering Code

Applications
 • Suitable for applications on medium or low temperature ventilated refrigeration units

Minimum sell quantity:

Order Quantity Multiple: