AXIOMATIC 0980AXPSU4K Converter - 24V to 48V DC

Features

• For operation under the most harsh and demanding conditions, the unit is fully sealed and enclosed to protect against moisture, shock and vibration


• Power from a battery or other source in the range of 20-30VDC is converted to a 48VDC output regulated to 1% and 3 Amps continuous current


• Input andoutput isolation is provided


• The unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection


• With a nameplate rating of 144 Watts of output power, the DC-DCConverter has an efficiency rated at >90%


• 24V DC to 48V DC Converter


• Input operating voltage range from 20 to 30VDC


• Conditioned output of 48VDC ± 1%, 3A, 144 Watts


• No minimum load requirement


• Switch mode operation delivers high efficiency


• Reverse polarity protection


• Input and output isolation


• Robust, rugged and highly reliable


• Compact size for ease of mounting in confined spaces


• Connects via a 4-pin plug with 2 meter lead wires


• Suitable for moist, high shock and vibration environments


• Operational from -40 to 70°C


• IP65 protection

Applications

• SCADA Systems


• Remote Terminal Units (RTU)


• Switchgear


• Motor Control Centers


• Telecommunications Equipment


• Charging/Cranking Battery Based Power Supply Systems


• Power Conditioning for Controls & Instrumentation utilizing


• DeviceNet or other industrial networks


• Off-Highway Equipment Control Systems


• Marine Auxiliary and Propulsion Systems


• The DC-DC Converter provides clean 48VDC power suitable for instrumentation and control networks or process equipment


• These applications are found in a variety of industries including process industries, general manufacturing, electricutilities, oil & gas, water/wastewater and mobile equipment

Specifications

• All specifications are typical at nominal input voltage and 25 degrees C unless otherwise specified


• Power Source: 24 VDC


• Operating Voltage Range: 20 - 30VDC continuous


• Maximum Input Current: 8 ADC


• Reverse Voltage Protection: Provided


• Over-voltage Shutdown: 33VDC


• Under-voltage Shutdown: 7.5VDC


• Nameplate Rating (Output Power): 144 Watts


• Output Current: 3 Amps continuous


• Output Voltage: 48VDC ± 1%


• Output Voltage: Ripple V(RIPPLE) < 250 mVpp


• Turn-on Time (with full load): 250 msec max/5% of final value


• Turn-on Overshoot: None


• Stability: Stable at all loads (no minimum load requirement)


• Transient Response: 200mV/1.5ms (No Load to Full Load) 100mV/1ms (50% - 100% Load)


• Short Circuit Current: Protection provided Self recovery 3.2A current limit


• Isolation: Isolated from input, output and chassis ground 500V between primary and secondary


• Efficiency >90%


• Operating Temperature -40 to 70°C (-40 to 158°F)


• Storage Temperature -50 to 85°C (-58 to 185°F)


• Humidity 0-99% relative humidity (non-condensing)


• Protection rating IP65


• Shock IEC 68-2-27 (30G/11ms)


• Vibration IEC 68-2-64


• Electrical Connection:


• Deutsch IPD P/N: DT13-4P Axiomatic Wire Harness: P/N: WH-DT06-4S-S- 16AWG-2M


• (comprised of a 4 pin plug Deutsch IPD P/N:DT06-4S assembly with 2 m (6.5 ft.) of 16 AWG unterminated lead wires)

Minimum sell quantity:

Order Quantity Multiple: