ELECTROMEN Oy TR-EM-208-H Single Motor Control Unit - IP66

Features
 • The FORWARD and BACK commands can be received in continuous or impulse signal mode
 • In continuous mode, the actuator continues to operate for as long as the command signal is activated
 • In impulse mode, only a single impulse is required to start and stop the actuator’s movement
 • The stop command has the highest priority and will be executed even if the command for running forward or backward has been activated
 • When the current limit is reached this is stated with the error output and the error LED
 • If overheating of the PCB occurs, the thermal protection will be activated and shut down the control unit
 • This is indicated by the error output and flashing error LED

Applications
 • Protecting actuator and application against overload

Specifications

 • Power supply: 12-35VDC (ripple max. 30%)
 • Max. power limit: 12A cont. 25A (25% ON / 75% OFF)
 • Standby power: Typically 10mA
Power limit:
 • Range 1: 1-5A (start 1.5x)
 • Range 2: 5-10A (start 1.5x)
 • Range 3: 10-25A (start 1.5x)
 • Thermal protection: 120°C
 • Start ramp: Adjustable 0-3 sec
 • Free deceleration: Adjustable 0-3 sec
 • Operating frequency: 2 kHz
 • Voltage loss: 0.6V (Im 12A)
 • Control inputs: “1”= 4-30VDC, “0”= 0-1V NPN
 • Error output: open-coll. 30V 50mA
 • Operating temp.: -10 to 60°C
 • Weight: Approx. 105 g
 • TR-EM-208 is declared to be in compliance under the designation TECH system 208 in combination with LINAK-compatible actuators and controls in accordance with the machinery directive 2006/42/EC Annex I as a partly completed machinery with focus on the following:
1.2.1;1.2.2;1.2.3;1.2.4.1;1.2.6;1.3.2;1.3.7;1.3.8
 • Voltage Rating - 12-35VDC

Minimum sell quantity:

Order Quantity Multiple: