Filter Element 2″ Teflon & Glass - (Replacement Only) - FF-250-E-2.5G

Features
 • FF-250 filter should be checked regularly to ensure element is in good condition
 • If filter element appears to be dirty or begins to cause flow restriction in system, it should be replaced

Specifications

 • Loosen bolt on bottom of filter housing (Refer to Image 2/Figure 1)
 • Pull assembly apart and remove element
 • Install glass shell onto bottom piece
 • May need slight twist to get shell over o-ring
 • Place new element into grooves in top and bottom of housing
 • Assemble top to shell assembly
 • Visually enure element is seated correctly in top groove
 • Replace bolt through bottom piece and screw clockwise into top piece
 • Tighten just enough so it does not vibrate loose

Minimum sell quantity:

Order Quantity Multiple: